點擊圖片查看大圖
XIAMETER? RBB-2881-30 硅橡膠
有機硅橡膠，適用于各種模壓制品
特性
? 30邵氏A型硬度
? 半透明
優點
? 可著色
? 適于模壓成型加工
? 適用于食品接觸
應用
? 一般模壓橡膠零件，例如鍵盤、墊圈及其它制品
典型物理性能
致規格制定者：以下數據不得用于規格制訂。
ASTM1 物性 單位 結果2
外觀 半透明
D926 塑化度 mm/100 190
D792 比重 g/cm3 1.11
D2240 硬度，邵氏A型 度 32
D412 拉伸強度 MPa 8.0
D412 伸長率 % 700
D624 撕裂強度，直角型 KN/m 20.0
1. ASTM：美國測試與材料協會
2.使用0.7份RC-4 （50P） （2,5-二[叔丁過氧基]-2,5-二甲基己烷） 在2mm厚板上獲得測試試片： 170℃下模壓成型10分鐘， 200℃ （392℉）下二次固化4小時。
描述
XIAMETER? RBB-2881-30硅橡膠是一種30硬度的有機硅橡膠復合材料，專用于生產模壓制品，效果良好。該硅橡膠能與其它XIAMETER? 品牌有機硅橡膠混合，所制得的材料具有中等硬度。其外觀呈半透明狀，因此易于著色，形成理想色調。XIAMETER?RBB-2881-30硅橡膠主要用于模壓制品的生產，如鍵盤、墊圈及其它雜品等，同時根據FDA要求規定，經過合理固化和消毒，該硅橡膠也適用于食品接觸。
應用方法
混合或著色適宜采用雙輥開煉機混煉工藝。應精確控制混煉時間，以確保物料混合均勻。模壓成型時，建議100份原料中加入0.6~1.0份RC-4 （50P）。標準固化溫度為170℃ （338℉），固化時間取決于終產品的厚度。多數情況下，應在模壓成型后,200℃ （392℉）下二次固化4 小時。
FEATURES
BENEFITS
APPLICATIONS
? General molded rubber parts such as keypad, gasket, packing and others
TYPICAL PROPERTIES
Typical Property Data-RBB-2881-30
DE
HOW TO USE
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY
PRODUCT SAFETYINFORMATION
USABLE LIFE AND STORAGE
FOOD CONTACT
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS or IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE or MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL or CONSEQUENTIAL DAMAGES.
RBB-2881-30
XIAMETER ? RBB-2881-30 Base
A silicone rubber designed for use in a variety of molded goods
? 30 Shore A hardness
? Translucency
? Pigmentable
? Suitable for molding process
? Suitable for food contact
Specification Writers: These values are not intended for use in preparing specifications.
? XIAMETER RBB-2881-30 Base is a 30 durometer silicone rubber compound especially designed to provide good results when making molded parts. It can be blended ? with other XIAMETER brand silicone rubbers to obtain intermediate hardness. It is translucent, and therefore can be easily pigmented to obtain most any color shade desired. ? XIAMETER RBB-2881-30 Base is primarily used for molded parts such as keypad, gasket, and other miscellaneous goods. It is also suitable for food contact applications when properly cured and cleansed, among others, in accordance with the requirements of FDA regulations.
For blending or pigmenting, milling with two-roll mill is the most suitable process. Milling time should be carefully decided to secure uniformity of materials. When molding, XIAMETER recommends to 0.6 to 1.0 part of RC-4 (50P) to 100 parts of the stock. Standard curing temperature is 170°C (338°F), and its cure time depends on the thickness of final products. Post cure condition would be 4 hours at 200°C (392°F), after molding in most cases. LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that ? Dow Corning and XIAMETER products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that Dow Corning or XIAMETER products will meet the sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL, ENVIRONMENTAL, AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE ON THE XIAMETER WEBSITE AT WWW.XIAMETER.COM
When stored at or below 50°C (122°F) in the original unopened containers, this product has a usable life of 9 months from the date of production
The components of XIAMETER RBB-2881-30 Base are listed in 21 CFR177.2600. This FDA regulation deals with rubber articles intended for repeated use in contact with food. The regulation contains limitations on extractables which apply to the finished fabricated articles. For this reason, compliance with such limitations is the responsibility of the user. This is FDA regulation is valid for US only, local regulatory requirements should be taken into consideration for Asia.
日本信越硅橡膠：FE-241U、FE-261U、FE-271U\KE-44-W、KE-941-U、KE-971T-U等更多系列氟硅橡膠。
德國瓦克硅橡膠：R230系列、R250系列、R270系列、R401-30/40/50/70,R420-30/50/70等瓦克更多系列。
美國道康寧硅橡膠：RBB-6300-50/70、RBB-6640-40、RBB-6650-50、RBB-6660-60、RBB-2003-30/50/70/80， RBB-2880-30/50， RBB-2030-40/80，RBB-2420系列，RBB-2220-55/50/70系列,RBB-2400-30系列,RBB-2881-30/50/70/80系列等。。。
藍星有機硅橡膠：HCR100系列，HCR200系列，HCR300系列，HCR900系列，HCR9100系列，HCR1500系列，HCR1600系列、HCR1700系列，HCR1900系列，HCR2900系列 ，LSR6300系列硅橡膠。
阿里店鋪鏈接：https://shop1378697393160.1688.com/?spm=0.0.0.0.ys57Az
聯系人：蔡小姐
手機：18938906825 13502838530
QQ：1637803126
(聯系我時請說明是在哪里看到的信息)
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換